Installation Support
Industries

Industrial Blowers & Pumps for Textile Dyeing, ETP & ZLD

Blowers, pumps and aeration equipment for dyeing units and CETPs in Tiruppur, Erode and Karur. Sizing, supply, installation & AMC across Tamil Nadu.
Overview

How Sigma supports this industry

Tamil Nadu’s dyeing and bleaching units in Tiruppur, Erode, Karur and Bhavani work under zero liquid discharge (ZLD) rules. That makes the effluent treatment plant as critical as the dyeing machines. When an aeration blower or effluent pump fails, production stops. Sigma Process Controls supplies blowers, pumps and aeration equipment for individual dyeing-unit ETPs and common effluent treatment plants (CETPs), with fast support from our Coimbatore base.
[01] Industries

Equipment across the textile ETP and ZLD chain

StageEquipmentWhy it matters
Collection & equalisationSubmersible sewage pump, twin lobe blower, jet aeratorMixes variable dye-house effluent and evens out pH and colour load
Biological treatmentTwin lobe / tri lobe Roots blowerContinuous oxygen supply for high-COD effluent
Chemical treatment & clarifierTransfer pumps, valvesMoves effluent through dosing and settling
Sludge handlingSewage pumpTransfers chemical and bio sludge to the filter press
RO feedVertical / horizontal multistage pumpHigh-pressure feed to RO membranes
Reject management (MEE / evaporator)Multistage pump, valvesMoves concentrated reject to evaporators
Recovered water reuseMultistage pumpReturns permeate to the dye house
[02] Industries

Built for tough dye-house effluent

Hot, saline effluent

We select the pump material of construction (MOC) and seals for temperature and high TDS.

24×7 aeration

Roots blowers with a standby unit, so the ETP keeps running while one is serviced.

High-pressure RO feed

Multistage pumps sized to your membrane pressure and recovery.

Energy cost

Aeration and RO feed are the largest loads in a ZLD plant. Right-sizing cuts the power bill.
[03] Industries

Fast support across the textile belt

Our Coimbatore team reaches Tiruppur, Erode and Karur quickly for breakdowns, spares and AMC visits. For dedicated pump service in the region, see Pump Service in Tiruppur & Erode.
[04] Industries

Recommended products for dyeing units and CETPs

Twin Lobe Blower: equalisation and biological aeration
Tri Lobe Blower: MBBR and low-pulsation aeration
Vertical Multistage Pump: RO high-pressure feed
Horizontal Multistage Pump: boiler feed and reject transfer
Submersible Sewage Pump: raw effluent and sludge
[05] Industries

Why dyeing units choose Sigma

We know the textile belt

our Coimbatore base is close to Tiruppur, Erode, Perundurai and Karur.

ZLD-ready selection

equipment chosen for the whole chain, from equalisation to RO and evaporator.

Downtime protection

duty and standby planning, stocked spares and AMC.

Lower running cost

right-sized aeration and RO feed pumps cut the two biggest power loads.
[06] Process

How we work with textile ETPs

[1]

Site visit or data review

effluent volume, COD, TDS, temperature and existing equipment.
[2]

Gap check

is current aeration and pumping capacity enough for today’s production?
[3]
Technical offer with model, MOC, motor and standby plan.
[4]
Supply, installation guidance and commissioning.
[5]
AMC and spares support, including pump service in Tiruppur & Erode.
[07] Industries

Textile clusters we serve

Tiruppur, Erode, Perundurai, Karur, Coimbatore, Salem and Namakkal, including the CETPs that serve their dyeing and bleaching units.
FAQs

Frequently asked questions

Still have a question?
Talk to our team about your application.
A twin lobe or tri lobe Roots blower with diffusers is the standard choice. We size it for your effluent flow and COD load, with a standby unit.
Yes. We choose pump MOC, impeller and mechanical seals for your effluent’s temperature, pH and TDS.
Yes. We supply vertical and horizontal multistage pumps for RO feed, permeate transfer and reject handling.
Yes. We support both individual dyeing-unit ETPs and common effluent treatment plants.
Sigma Pattern Mark - Sigma Process Controls
Get a Quote

Run a dyeing unit or CETP? Call +91 94870 69937 for sizing, spares or AMC.